Видео

Mpi ke bare me jankari chahiye

What is good for portable Magnetic particle (Zyglo?)aerosol can for it can be clean by water.

What is a good portable and small battery pack for this?

How make such coil?

Great stuff. This will help me plenty for my upcoming FAA Orals & Practicals.

the illustration is not clear , and monotonous speaking , better if you explain with practicle method and live illustration

Question #[1] When to use AC and DC selection ,can you explain with some figures Question # [2] Technicians use the probe tip touching at angle ,is it nott correct to use such that most of the area of the yoke tip rests perfectly on surface ,like lifting the soild test piece you show in vedio

How would you demagnetize a human body?

Fair bit missing from this video. AS5282 ring test required prior to testing parts, system performance must be confirmed! Centrifuge should be demagnetised after pouring the sample. Continuous wet method requires the fluid to be stopped just prior to the first shot. You absolutely cannot use a castrol strip to confirm adequate magnetic field strength, only a QQI or Hall effect meter or part with known defect can do that. ASTM E1444 is pretty clear on the only approved methods for confirming field strength and direction.

He got it wrong! 3:37

Hi may i know the capacity of frequency converter that will be compatible to this equipment

Can you make an in depth video about the emulsifiers? What they are, and why/when they are used? Or direct me to a video or source that can answer this question?

I think there is a mistake in the video at 0:56 unidirectional is being inspected in the circular direction

Kindly also uploaded how to Servicing /minor maintenance

I use tons of WCP, much to the detriment of my lungs probably. So I like using a rust-Oleum spray trigger but the gap under the ring where it fits on your cans are too tight. So I use a screw driver to pry it apart all the way around just a little and that does the trick. That Rust-Oleum trigger attachment really helps when you spray 5 to 10 cans a day

no wattage? power draw, you know the important info. oh you can drop it lol, useless video

Get rid of the annoying music. wtf. if it wasn't for CC I'd miss the garbled mumbles of some key words.

So magnaflux zl-27a not just can be removed with post-emulsifiable method, but also solvent method ?? Because when i see the description product it says method b/c/d

Shit video

I still don't understand why anybody outside of china and Korea don't sell 4 pole yokes for testing in 2 directions simultaneously. Everybody only sells 2 yoke set up. Now yes there lighter but there not always the most practical for testing. If you have a component and it's is enormous in size and has a HUGE area that you need to test, a 4 pole magnet would get the job done in half the time. Tank floors are a great example where a 4 pole is WAY better than a 2 pole

Hello, I need to know what is the maximum examination thickness in pieces to be inspected in a wet horizontal unit for MT magnetic particle tests or through the use of the magnetic yoke, either by wet or dry technique. I have reviewed the ASNT NDT Handbook Vol 8 MT and the ASTM E 1444 and E709 standards and I have not found information about it. I would greatly appreciate your response.

Great video. Is there a video showing how to calibrate the machine with Magnaflux ammeter and shunt kit?

How to operate Ultrasonic Testing UT full Video Step by Step All Menu’s Feed Parameters @Babar_Shaikh ruclips.net/video/RH3gkvVY9VU/видео.html

Can i use a yoke with 20b water soluble

HAHAHAHAHHA why did you just dump the powder on the weld. You have to lightly dust it on there, that's the most ridiculous instruction I've ever seen.

dear sir where can I get this Gadget , i need it to checking the surface crack detection is this Product can do it such like steel pipe, engine block or engine head crack? thanks for reply

What's up with the Demag of the centrifuge? Very important my guy...

como puedo contactarme con ustedes para cotizar productos para la industria automotriz

Where can I get a Magnaflux apron ? 😀

What is the maximum capacity of transformer?

Very informative

Good demonstration, but I think you should also kindly do a video of how the amperages of the various methods (Head Shot, Central Conductor and Coil Shot methods) are calculated and entered into the wet bench machine before magnetization.

All welders and inspectors who work with NDE/NDT need to see this lesson. Thanks Again for the excellent video. T J (Tom) Vanderloop, CMfgE & AWS/SME Professional, Author, and Technical Manufacturing Engineer.

From Wisconsin

Would brake cleaner be an acceptable solvent to both pre-clean and post-clean the area to be inspected? In a time sensitive setting due to not having the recommended cleaner.

Full Video For Magnetic Particle Testing Subscribe Me For NDT Training Free Video’s ruclips.net/video/V8MolR6g9f4/видео.html

This is rechargeable?

What about lighting conditions ? Lift of weights ? Use of pie shaped indicator ?

Fundamentals Ultrasonic Testing Machine ruclips.net/video/iDNdyromxII/видео.html

Fundamental Of Ultrasonic Testing Machine ruclips.net/video/iDNdyromxII/видео.html

dye penetrant can be used on stainless steel?????, (Conditions must be met according to the Code(ASME V) in order for the process to take place.

Your 6 step process is missing oven drying time.

how do you do that?

Working on my level 2 MT certification, thanks for the video

What is inside the led light ? And how to work

Can We do the contact shot and coil shot right one after another and then can we see longitudinal and circular discontinuities ?

Thanks, this will help lot of L2 and L3s! Keep up the great work!

Donde puedo hacer cursos de NDT con certificación magnaflux?

Please specify what eye protection to wear while performing magnetic particle inspection

The much discussed debate or myth of smaller the particle size better indications- explained really well.